Sound Insulation Costs
NOTE: All projects by Engineering Dynamics are treated on an individual basis, and therefore we must be contacted for a formal quotation for a specific project for actual costs.
Specialist consultants (such as Engineering Dynamics) can provide designs for specific problems and undertake measurements to establish what increase in sound insulation is required. In our opinion, this is the best way to tackle a noise problem.
To be sure of a design, it is usually necessary to make measurements of the existing sound insulation provided by a building. This requires access to both sides of a partition, so it is useful to be on reasonable terms with your neighbours. Engineering Dynamics can undertake a measurement of sound insulation of a number of partitions between two properties.
Measurement Survey
– Sound Insulation Test as per BS 2750 and the Building Regulations.
– Requires access to both sides test wall/floor.
– Preferred test for subsequent design.
– 1 hour measurement of noise from neighbours (client chooses time).
– Longer survey durations may be required.
Cost TBA
Additional Partitions or Floating Floor
– Only applicable following a measurement survey.
– Designs produced as either a set of indicative sketches, or builders plans at extra cost.
– Site supervision can be provided.
Cost TBA per partition
Room Within a Room
– Only applicable following a measurement survey.
– Designs produced as either a set of indicative sketches, or builders plans at extra cost.
– Site supervision can be provided.
Cost TBA for 1 room
Quiet Haven
– A high performance room within a room design, aimed at providing as near to total sonic isolation as is possible.
– Requires detailed sound insulation tests.
– Each Quiet Haven project is a bespoke design, therefore each one must be cost for individually.
– As an indication, the quote will tend to be in thousands rather than hundreds.
– Call to discuss if you are serious about sound insulation.